We use a range of specialised piling equipment.
|
| Quiet Rigs |
| |
|
This semi automatic drop hammer rig is mounted on a Bobcat X331 chassis.
It is powered by a Hatz clean burn diesel engine, is able to pass through a 1600mm opening and, as a 'QuietRig', only produces 84dBs of noise at about one metre radius.
This 'QuiteRig' is ideal when working in school and hospital environments, in church grounds or in suburban areas where noise nuisance can cause problems in the vicinity. Inside structures it is able to work in four metres headroom in standard configuration. This rig can provide piles capable of 300kN SWL at FoS 2.5, in the right ground conditions.
|
| JCB 4x4 Tractor Unit |
| |
|
This semi automatic hydraulic drop hammer rig is mounted on a JCB 4x4 tractor unit.
This rig has similar noise characteristics to the Bobcat rig and provides little disturbance. Permanent steel casings of 220mm, 254mm and 273mm can be driven to produce a range of capacities between 125kN and 400kN SWL.
|
| |
|
| |
| D1000 Rig |
| |
|
Alliance Piling have added a D1000 rig to their equipment list.
A range of drop hammers, up to one tonne, can drive tubular piles of 150 mm, 220 mm, 275 mm and 300 mm diameter. |
| Underpinning Plant and equipment |
| |
|
Alliance Piling carry a range of air winch drop hammer, mole type hammers, compressors, dumpers and miscellaneous small plant with which to carry out underpinning or small new build work. |
| Other Plant |
| |
|
Where required Alliance Pilling are able to source additional plant, with experienced and qualified crews, in order to meet customer requirements. |
